泥岩隧道光面爆破的技术参数研究及应用

民爆库

摘要：  
针对泥岩隧道的特殊性,通过优化光面爆破的爆破参数,讨论泥岩隧道掘进的经济性、安全性.采用预埋振速传感器监测的方式,分析光面爆破对隧道周围岩体的扰动.现场光爆技术应用效果显著,隧道开挖轮廓线内基本未出现超欠挖现象,半孔率达86％以上,爆破进尺提升约15％,孔痕长度基本均匀分布一般都在孔长的66％以上;萨道夫斯基公式的系数K衰减明显、α基本稳定,光爆的振动速度和围岩扰动都得到了有效控制.
Abstract：  
Focusing on the smooth blasting technical parameters of mudstone tunnel,this paper optimized the smooth blasting parameters and discussed the economy and safety of mudstone tunnel excavation.The embedded velocity sensor monitoring method was adopted to analyze the perturbation of smooth blasting to surrounding rock.Application of this technology is successful and has significant effects,which means the contour basically does not appear the overbreak phenomenon,half hole rate is above 86％,the blasting footage increased by about 15％,the length of the hole marks a substantially uniform distribution which is more than 66 ％ long holes,K and α coefficient calculation formula of the attenuation was obvious,α is stable,vibration velocity and rock burst light disturbance have been effectively controlled.
doi：  10.3969/j.issn.1672-1144.2017.01.040  
作者：  安静   
Author：  AN Jing   
作者单位：  山西交通职业技术学院,山西太原,030619  
刊  名：  水利与建筑工程学报ISTIC  
Journal：  Journal of Water Resources and Architectural Engineering  
年，卷(期)：  2017, 15(1)  
分类号：  U455  
关键词：  泥岩隧道  光面爆破  爆破参数  围岩扰动  
Keywords：  mudstone tunnelsmooth blastingblasting parameterssurrounding rock disturbance  
在线出版日期：  2017年5月8日  

原文网址：

1. http://d.wanfangdata.com.cn/Periodical/fsjs201701040

复制代码

xiongyw

学习了