工业炸药成品装车位的隔爆设计

民爆库

摘要：  
对于一些工业炸药生产线老厂区,由于厂区内建设用地紧张、内部距离受限等原因,无法在原有生产线基础上单独设置成品中转站台或成品中转库时,需要找到一种可靠措施,在保证转运车辆中工业炸药与生产工房内存药不相互殉爆的前提下实现工房土堤外装车.通过某公司的隔爆墙设计实例得出,采用两层钢砼墙板中间夹砂的组合隔爆墙替代防护土堤,占地面积小,能够起到抗爆、防殉爆效果,可以有效阻止生产工房或成品装车位有一方爆炸时导致另一方主体结构遭受严重破坏,是解决工业炸药生产企业老厂区工业炸药生产线防护土堤外装车的有效途径之一.
Abstract：  
In some industrial explosives production lines,due to reasons,such as the limitation of old factorv construction landing and the internal distance,the finished transit station or store cannot be set separately based on the original production line.In this ease,it needs to find a reliable measure to ensure that industrial explosives could be loaded outside protective earth mound for the workshop building,which should be under the premise of no interaction between loaded explosives in the transportation truck and explosives in the workshop building.In this article,explosion-interrupted wall was designed in a factory to conclude that combined explosion-interrupted wall with two side R.C.(reinforced concrete) slabs filled with sand is a better choice to replace protection earth embankment.It would occupy less area and has better explosion-interrupted performance and sympathetic detonation prevention performance,which indicates it could prevent workshop building or production loading place from suffering serious structure damage caused by explosion of the other side.It is one of efficient solutions to explosion-interrupted design for the loading place in old factory.
doi：  10.3969/j.issn.1001-8352.2017.04.005  
作者：  岳纪炜  陈玉  侯斯婕  乔枫革   
Author：  YUE Jiwei    CHEN Yu    HOU Sijie    QIAO Fengge   
作者单位：  中国兵器工业规划研究院 北京,100053  
刊  名：  爆破器材ISTICPKU  
Journal：  Explosive Materials  
年，卷(期)：  2017, 46(4)  
分类号：  TQ560.8  X932  
关键词：  隔爆墙  殉爆  钢砼墙  防护土堤  工业炸药生产线  
Keywords：  explosion-interrupted wallsympathetic detonationR.C.(reinforced concrete) wallprotection earth moundproduction line of industrial explosives  
在线出版日期：  2017年9月18日  

原文网址：

1. http://d.old.wanfangdata.com.cn/Periodical/bpqc201704005

复制代码